IDE Interface Card: Revision A

Last Updated: November 09, 2005 09:48:33 PM

Rev. A of the IDE Interface card populated with a CF to IDE interface and 16MB CF card. Jumpers select the I/O ports for IDE control and data read/write.


This design is borrowed directly from Mike Riley’s 8 bit IDE Interface. The only change is the addition of some jumper blocks to select I/O ports. This is required to support compatibility of some older software of my own that used the original ports.

Issues/todo log

Date Description Status

Schematics, board layout, and operational description

Revision Production Date Schematic Layout Operational Description
A Feb. 11/2005 ide1-a.sch